PIPE IN5PECTION&REPAIR EXPERT

X120-D

•Curing time of only 8 minutes

•Accurately positioned to the repair spot

•5.5-inch sunlight OLED screen realFtirne monitor

•Accurately positioned to the repair spot


Give me a: Call Down Quote

ES UV CURE PATCH LINER SYSTEM.   

Three (3) UV light packers for sizes ranging 150mm to 800mm.

Custom sizes up to 1500mm available on request. 

ES UV CURE FULL LINER SYSTEM   

400mm liner laid out for demo   

Liner end preparation  

20’ container control center c/w generator and air compressor    

Liner inflated for initial rounding process. 

Light train developed and made in-house



ES UV CURE FULL LINER SYSTEM   

Light train insertion   

Entire operation controlled, monitored and recorded using laptop

Pressure gauge at top left corner monitors liner internal pressure during curing    

End cap replaced, compressed air line reattached, light train ready for turning on

Liner fully inflated and light train activated


Give me a: Call Down Quote

ES UV CURE FULL LINER SYSTEM   

Light train insertion   

Entire operation controlled, monitored and recorded using laptop

Pressure gauge at top left corner monitors liner internal pressure during curing    

End cap replaced, compressed air line reattached, light train ready for turning on

Liner fully inflated and light train activated

UV Cure CIPP Systems • Spot Repair

Pipeline Rehabilitation

The X120-Dpatch short liner system is mainly comprised of the master control system and the pipe plug, with the key features of high efficiency, accuracy and controllability. After the pretreatment of pipelines, move the pipe plug with restorative materials to the position to be restored, and inflate the pipe plug to the given pressure to stick the restorative materials onto the pipe wall tightly. The solidification will be finished after 8-10 minutes after opening the ultraviolet lamp inside the pipe plug. Then, deflate the pipe plug, take up the cable reel and remove the pipe plug. And at the time, the restoration is completed.

Give me a: Call Down Quote
Phone:+86-18871858099
Address:No.9-2, Wudayuan No.1 Road, GEO OFFICE, Donghu High-tech Development Zone, Wuhan, Hubei, China